CODE: CHD001
Champion Nails Hot Dipped Galvanised Annular Ring – 50 x 2.8mm
(3300 + 3 Fuel Cells per pack)
Notify me when back in stock
Join the waitlist to be emailed when this product becomes available
- Size: 50 x 2.8mm
- Pack Qty: 3300 + 3 fuel cells
- Finish: Hot Dipped galvanised plating, suitable for indoor and outdoor applications. Conforms to eurocode 5 and service class 3.
- Nail Type: Annular Ring Shank
- Champion collated nails are designed for the fixing of timber and timber framing using various proprietary types of pneumatic and cordless application tools.
- Champion collated nails are manufactured to conform with EN792-13:2000 7.2.1a and comply with the requirements of all major tool manufacturers.
- Various levels of rust protection to comply with building regulations and meets with all service classes.
- Diamond Point for maximum penetration.
- 34° collation angle. Clipped head to increase the number of nails per strip and therefore reduce tool loading times.
Compatible with:
Paslode Impulse: 300, 325, 350
Powermaster Plus: 325, 350, F250S-PP, F350S, CT 325, 5325S, GN212, IMCT, SK312
Hitachi: NR83AA, NR83AA2, NR90AA, NR90AD
Dewalt: D51822, D51823, D51823K
Hilti: CHN 9033
Senco: SN2, SN2+, SN3, SN4, SN70, SN325, SN325+
Framepro Models: 600, 601, 651, 701XP, 750XL, 751XP
Makita: AN942
Bostitch: F33PT, N79PT, N90PT
Spotnails: YTD90
Stainless steel nails must be used for oak and cedar timbers and in areas of high pollution and damp salty atmospheres
- Size: 50 x 2.8mm
- Pack Qty: 3300 + 3 fuel cells
- Finish: Hot Dipped galvanised plating, suitable for indoor and outdoor applications. Conforms to eurocode 5 and service class 3.
- Nail Type: Annular Ring Shank
- Champion collated nails are designed for the fixing of timber and timber framing using various proprietary types of pneumatic and cordless application tools.
- Champion collated nails are manufactured to conform with EN792-13:2000 7.2.1a and comply with the requirements of all major tool manufacturers.
- Various levels of rust protection to comply with building regulations and meets with all service classes.
- Diamond Point for maximum penetration.
- 34° collation angle. Clipped head to increase the number of nails per strip and therefore reduce tool loading times.
Compatible with:
Paslode Impulse: 300, 325, 350
Powermaster Plus: 325, 350, F250S-PP, F350S, CT 325, 5325S, GN212, IMCT, SK312
Hitachi: NR83AA, NR83AA2, NR90AA, NR90AD
Dewalt: D51822, D51823, D51823K
Hilti: CHN 9033
Senco: SN2, SN2+, SN3, SN4, SN70, SN325, SN325+
Framepro Models: 600, 601, 651, 701XP, 750XL, 751XP
Makita: AN942
Bostitch: F33PT, N79PT, N90PT
Spotnails: YTD90
Stainless steel nails must be used for oak and cedar timbers and in areas of high pollution and damp salty atmospheres