CODE: 48406
Fischer EAII Drop in Anchor – M12 x 50mm
(25 per pack)
The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval.
Product details:
- Diameter: M12
- Length: 50mm
- Finish: Zinc Plated
- Drill Size: 15mm
- Box Qty: 25
Approved for:
- Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
- Concrete C20/25 to C50/60, non-cracked
- Concrete C12/15
- Natural stone with dense structure
Ideal for:
- Pipelines and ventilation ducts
- Sprinkler systems
- Cable conduits and wires
- Gratings
- Steel constructions
- Machines
- Consoles
- Shuttering props
Features:
- Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
- Use of standard metric screws and threaded rods lowers complexity.
- Power-saving series installation with machine setting tool EA II S-SDS.
- Visual control due to embossing.
- ETA approval for non-cracked concrete and multiple fixings.
The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval.
Product details:
- Diameter: M12
- Length: 50mm
- Finish: Zinc Plated
- Drill Size: 15mm
- Box Qty: 25
Approved for:
- Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
- Concrete C20/25 to C50/60, non-cracked
- Concrete C12/15
- Natural stone with dense structure
Ideal for:
- Pipelines and ventilation ducts
- Sprinkler systems
- Cable conduits and wires
- Gratings
- Steel constructions
- Machines
- Consoles
- Shuttering props
Features:
- Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
- Use of standard metric screws and threaded rods lowers complexity.
- Power-saving series installation with machine setting tool EA II S-SDS.
- Visual control due to embossing.
- ETA approval for non-cracked concrete and multiple fixings.