CODE: SMH/S/75X200
BPC Timber to Masonry Joist Hanger – 75mm x 200mm
(Each)
Order BPC Timber to Masonry Joist Hanger 75mm x 200mm. Made from thick pre-galvanised steel. Designed for building into brickwork or blockwork.
BPC Timber to Masonry Joist Hanger Overview
The masonry hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600 compliant with BS6178: Part 1:1990 and to the requirements of BS5268.
The galvanised steel joist hanger features a wide top flange design to offer increased loading capacity on masonry with a minimum crushing strength of 2.8N/mm2 and above. Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
BPC Joist Hanger Specifications
All joist hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists
-
- Width: 75mm
- Height: 200mm
BPC Masonry Joist Hanger Installation Details
-
- The back plate of the joist hanger must be flush against the supporting masonry
- A minimum of 675mm of cured masonry must be in position above the joist hanger flanges before any load is applied
- Timber joists should be cut square and butt up to the back face of the hanger with a maximum allowed gap of 6mm
- Nail to the timber joist through all pre-punched holes in each side gusset with 30 x 3.75mm sherardised square twist nails
- It is recommended that ceiling joists are notched at the hanger base to achieve a level surface when using plasterboards
At Tradefix Direct, we aim to provide the highest quality products from leading brands. Head over to our joist hangers section to discover the whole range. Our BPC Joist Hanger collection features both timber to masonry joist hangers as well as timber to timber. Explore today!
Don’t forget, we offer free delivery on all orders over £60 and price breaks for bulk quantity orders. Don’t miss out on our Tradefix Rewards scheme when you register for an account with us.
Order BPC Timber to Masonry Joist Hanger 75mm x 200mm. Made from thick pre-galvanised steel. Designed for building into brickwork or blockwork.
BPC Timber to Masonry Joist Hanger Overview
The masonry hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600 compliant with BS6178: Part 1:1990 and to the requirements of BS5268.
The galvanised steel joist hanger features a wide top flange design to offer increased loading capacity on masonry with a minimum crushing strength of 2.8N/mm2 and above. Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
BPC Joist Hanger Specifications
All joist hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists
-
- Width: 75mm
- Height: 200mm
BPC Masonry Joist Hanger Installation Details
-
- The back plate of the joist hanger must be flush against the supporting masonry
- A minimum of 675mm of cured masonry must be in position above the joist hanger flanges before any load is applied
- Timber joists should be cut square and butt up to the back face of the hanger with a maximum allowed gap of 6mm
- Nail to the timber joist through all pre-punched holes in each side gusset with 30 x 3.75mm sherardised square twist nails
- It is recommended that ceiling joists are notched at the hanger base to achieve a level surface when using plasterboards
At Tradefix Direct, we aim to provide the highest quality products from leading brands. Head over to our joist hangers section to discover the whole range. Our BPC Joist Hanger collection features both timber to masonry joist hangers as well as timber to timber. Explore today!
Don’t forget, we offer free delivery on all orders over £60 and price breaks for bulk quantity orders. Don’t miss out on our Tradefix Rewards scheme when you register for an account with us.