CODE: SMH/S/47X150
BPC Timber to Masonry Joist Hanger – 47mm x 150mm
(Each)
Shop the BPC Timber to Masonry 47mm x 150mm Joist Hanger at Tradefix Direct. This standard Single Piece Masonry Joist Hanger is designed for building into brickwork or blockwork.
As standard, all BPC Timber to Masonry Joist Hangers are compliant with BS6178: Part 1:1990 and to the requirements of BS5268. These are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600.
A wide top flange design offers increased loading capacity on masonry. The minimum crushing strength is 2.8N/mm2 and above. Joist Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
All BPC Joist Hangers feature a 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists using 30 x 3.75mm sherardized square twist nails.
- Width: 47mm
- Height: 150mm
BPC Timber to Masonry Joist Hanger Installation Details
- The back plate of the joist hanger must be flush against the supporting masonry
- A minimum of 675mm of cured masonry must be in position above the joist hanger flanges before any load is applied
- Timber joists should be cut square and butt up to the back face of the hanger with a maximum allowed gap of 6mm
- Nail to the timber joist through all pre-punched holes in each side gusset with 30×3.75mm sherardized square twist nails
- It is recommended that ceiling joists are notched at the hanger base to achieve a level surface when using plasterboards
Discover our range of high-quality BPC Joist Hangers available to shop online. At Tradefix Direct, you can choose from a variety of 47mm x 150mm Joist Hangers suitable for different projects. For fast next day delivery, spend over £60. We also offer prices breaks for larger volumes. Register with us to earn points and join our Tradefix Rewards loyalty scheme.
Shop the BPC Timber to Masonry 47mm x 150mm Joist Hanger at Tradefix Direct. This standard Single Piece Masonry Joist Hanger is designed for building into brickwork or blockwork.
As standard, all BPC Timber to Masonry Joist Hangers are compliant with BS6178: Part 1:1990 and to the requirements of BS5268. These are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600.
A wide top flange design offers increased loading capacity on masonry. The minimum crushing strength is 2.8N/mm2 and above. Joist Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
All BPC Joist Hangers feature a 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists using 30 x 3.75mm sherardized square twist nails.
- Width: 47mm
- Height: 150mm
BPC Timber to Masonry Joist Hanger Installation Details
- The back plate of the joist hanger must be flush against the supporting masonry
- A minimum of 675mm of cured masonry must be in position above the joist hanger flanges before any load is applied
- Timber joists should be cut square and butt up to the back face of the hanger with a maximum allowed gap of 6mm
- Nail to the timber joist through all pre-punched holes in each side gusset with 30×3.75mm sherardized square twist nails
- It is recommended that ceiling joists are notched at the hanger base to achieve a level surface when using plasterboards
Discover our range of high-quality BPC Joist Hangers available to shop online. At Tradefix Direct, you can choose from a variety of 47mm x 150mm Joist Hangers suitable for different projects. For fast next day delivery, spend over £60. We also offer prices breaks for larger volumes. Register with us to earn points and join our Tradefix Rewards loyalty scheme.