The fischer threaded rod FIS AM is made from zinc-plated, steel grade 5.8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.

• Diameter: M12
• Length: 120mm
• Finish: Zinc plated
• Pack Qty: 10

• The threaded rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications.
• The wide range of approved threaded rods FIS A from M6 to M30 allows for various applications.
• Please refer to the approvals of the injection mortar used.

• Approved anchorings with Injection mortars FIS SB, FIS EM, FIS EB, FIS V, FIS VL, FIS GREEN and FIS P Plus
• Anchorings without approval with Injection mortar FIS P