Also referred to as a double cross or Pozidriv, the Z-shaped cross recess represents an advancement of the cross drive introduced by the Phillips Screw Company. Unlike the conventional cross drive, the four flanks of the screwdriver blade in the Z-shaped version do not taper towards the tip. This design enhances the lateral grip for the screwdriver bit and diminishes the occurrence of the so-called cam-out effect. The cam-out effect is typical in traditional cross drives, where the tapering causes the bit to be pushed upward and out by the torque exerted by the cordless screwdriver. What this translates to for you: No more concerns about screwdriver bits slipping out, making your work easier with significantly less effort. This efficiency saves a considerable amount of time.
CODE: SCP021
Spax Flat Csk Screws Yellox Coated – Pozi – 5.0 x 40mm
(200 per pack)
Notify me when back in stock
Join the waitlist to be emailed when this product becomes available
- Diameter: 5.0mm
- Length: 40mm
- Head Type: Countersunk
- Drive Type: Pozi PZ2
- Finish: Zinc and Yellow Passivated
- Pack Qty: 200
SPAX ground serrations
The advantage of a thread with SPAX ground serrations as opposed to a conventional thread is that it can cut through the fibres of the material more easily. This functions similarly to a serrated knife, which offers the same advantages e.g. when cutting a tomato. The SPAX ground serrations on the thread of the SPAX, in combination with the SPAX 4CUT point allow use without pre-drilling (wood-dependent)!
SPAX MULTI head
The SPAX MULTI Head has recessed pocket segments. Edges are thus formed between the individual segments, which reveal their cutting effect when they come into contact with wood. The head is thus countersunk cleanly and flush. If a SPAX with SPAX MULTI Head is used for attaching a metal fitting, the non-recessed surfaces of the screw stop when they come into contact with the metal fitting. This effectively prevents over-screwing the screw, and creates a solid connection between the metal fitting and the component. The surfaces are not damaged.
- Diameter: 5.0mm
- Length: 40mm
- Head Type: Countersunk
- Drive Type: Pozi PZ2
- Finish: Zinc and Yellow Passivated
- Pack Qty: 200
SPAX ground serrations
The advantage of a thread with SPAX ground serrations as opposed to a conventional thread is that it can cut through the fibres of the material more easily. This functions similarly to a serrated knife, which offers the same advantages e.g. when cutting a tomato. The SPAX ground serrations on the thread of the SPAX, in combination with the SPAX 4CUT point allow use without pre-drilling (wood-dependent)!
SPAX MULTI head
The SPAX MULTI Head has recessed pocket segments. Edges are thus formed between the individual segments, which reveal their cutting effect when they come into contact with wood. The head is thus countersunk cleanly and flush. If a SPAX with SPAX MULTI Head is used for attaching a metal fitting, the non-recessed surfaces of the screw stop when they come into contact with the metal fitting. This effectively prevents over-screwing the screw, and creates a solid connection between the metal fitting and the component. The surfaces are not damaged.