Buy BPC Timber to Masonry Joist Hanger 47mm x 200mm at Tradefix Direct.

The standard Single Piece Galvanised Steel Joist Hanger is designed for building into brickwork or blockwork with increased capacity

BPC Timber to Masonry Joist Hanger Overview

As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600 compliant with BS6178: Part 1:1990 and to the requirements of BS5268.

The BPC Joist Hanger features a wide top flange design to offer increased loading capacity on masonry with a minimum crushing strength of 2.8N/mm2 and above. Joist hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.

BPC Joist Hanger Specifications

• Width: 47mm
• Height: 200mm
• All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists
• To be used with 30 x 3.75mm sherardized square twist nails.

Masonry Joint Hanger Installation Details

• The back plate of the joist hanger must be flush against the supporting masonry
• A minimum of 675mm of cured masonry must be in position above the joist hanger flanges before any load is applied
• Timber joists should be cut square and butt up to the back face of the hanger with a maximum allowed gap of 6mm
• Nail to the timber joist through all pre-punched holes in each side gusset
• It is recommended that ceiling joists are notched at the hanger base to achieve a level surface when using plasterboards

Shop the full range of our BPC Joist Hangers suited to a range of projects. We also stock joist hangers from leading brands such as Simpson and Timco. At Tradefix Direct, we aim to provide the best quality products on the market at competitive prices.

Free on-site delivery next day when you spend £60 or more. You can also benefit from price breaks with bulk quantity orders. New to Tradefix? Sign up for an account and you can receive exclusive rewards through our loyalty scheme!