Shop for BPC Timber to Masonry 50mm x 200mm Joist Hanger at Tradefix Direct. This standard Single Piece Masonry Joist Hanger is designed for building into brickwork or blockwork.

As standard, all BPC Timber To Masonry Joist Hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600. Compliant with BS6178: Part 1:1990 and to the requirements of BS5268.

The wide top flange design of this BPC Joist Hanger offers increased loading capacity on masonry with a minimum crushing strength of 2.8N/mm2 and above. Joist Hangers 150mm deep and over are manufactured to 10mm less. This allows for notching and regularisation of timber joists.

All Timber To Masonry Joist Hangers feature a 75mm bearing surface and pre-punched side gussets. They are designed for nail fixing into timber joists with 30 x 3.75mm sherardized square twist nails.

• Width: 50mm
• Height: 200mm

BPC Joist Hanger Installation Details

• The back plate of the joist hanger must be flush against the supporting masonry
• A minimum of 675mm of cured masonry must be in position above the joist hanger flanges before any load is applied
• Timber joists should be cut square and butt up to the back face of the hanger with a maximum allowed gap of 6mm
• Nail to the timber joist through all pre-punched holes in each side gusset with 30×3.75mm sherardized square twist nails
• It is recommended that ceiling joists are notched at the hanger base to achieve a level surface when using plasterboards

Read More Technical Data

Discover the full range of BPC Joist Hangers at low trade prices. At Tradefix, Direct we stock a wide selection of 50mm x 200mm Joist Hangers that are high-quality and suitable for various projects. Shop with us and get fast day delivery next day on orders over £60. Don’t forget to register with us to earn points and get access to exclusive Tradefix Rewards!