CODE: 508014
Fischer FBN II HD Galvanised Through Bolts – M12 x 90mm
(Qty: 20)
Each
£47.49
2+
£45.12
5+
£42.86
CODE: 507579
Fischer FBN II HD Galvanised Through Bolts – M10 x 85mm
(50 per pack)
The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor... Read more
£89.32
(50 per pack) BULK QUANTITY DISCOUNTS
2+
£84.87
4+
£80.63
Free delivery on orders over £60
Trade prices and bulk discounts
The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The bolt anchor is made of hot-dipped steel and is suitable for railings, handrails or consoles.
Product details:
- Diameter: M10
- Length: 85mm
- Drill Size: 10mm
- Max Fixing Thickness: 10mm
- Finish: Hot Dipped Galvanised
- Box Qty: 50
Approved for:
- Concrete C20/25 to C50/60, non-cracked
Also suitable for:
- Concrete C12/15
- Natural stone with dense structure
Ideal for:
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Machines
- Gates
- Façades
Advantages:
- The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
- The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
- The first bolt anchor with variable working life covers the usage of bolt anchors in wet conditions and outdoor areas.
- The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
- Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
- The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.
The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The bolt anchor is made of hot-dipped steel and is suitable for railings, handrails or consoles.
Product details:
- Diameter: M10
- Length: 85mm
- Drill Size: 10mm
- Max Fixing Thickness: 10mm
- Finish: Hot Dipped Galvanised
- Box Qty: 50
Approved for:
- Concrete C20/25 to C50/60, non-cracked
Also suitable for:
- Concrete C12/15
- Natural stone with dense structure
Ideal for:
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Machines
- Gates
- Façades
Advantages:
- The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
- The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
- The first bolt anchor with variable working life covers the usage of bolt anchors in wet conditions and outdoor areas.
- The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
- Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
- The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.
Customers also bought