CODE: 903231
Paneltwistec Stainless Steel Structural Screws Countersunk – 8 x 100mm
(Qty: 50)
Each
£25.66
4+
£23.11
10+
£21.94
CODE: 903230
Paneltwistec Stainless Steel Structural Screws Countersunk – 8 x 80mm
(50 per pack)
The Paneltwistec wood screws of specially hardened stainless steel have a special screw tip and milled ribs above the thread. The special geometry of the Schraubenspitze AG screw brings about... Read more
£22.07
(50 per pack) BULK QUANTITY DISCOUNTS
4+
£18.92
10+
£17.98
Free delivery on orders over £60
Trade prices and bulk discounts
The Paneltwistec wood screws of specially hardened stainless steel have a special screw tip and milled ribs above the thread. The special geometry of the Schraubenspitze AG screw brings about a reduction of the screwing torque and in addition leads to a lower splitting effect when
screwing in the screw.
Product details:
- Diameter: 8.0mm
- Length: 80mm
- Thread length: 50mm
- Head type: Countersunk
- Head diameter: 14.5mm
- Drive type: TX40
- Material: Hardened Stainless Steel
- Box qty: 50
Advantages:
- Faster and simpler screwing-in
- Lower splitting effect
- National and international approvals
- Higher corrosion resistance than conventional galvanising
- Applicable in service classes 1 and 2
- Contains no chromium(VI) oxide
- Resistant to mechanical loading
- Inhibits contact corrosion with fixtures
- No knocking of the screws when screwing in with a TX drive
Certification:
• European Technical Approval ETA-11/0024
• Self-drilling screws as wood fastener
The Paneltwistec wood screws of specially hardened stainless steel have a special screw tip and milled ribs above the thread. The special geometry of the Schraubenspitze AG screw brings about a reduction of the screwing torque and in addition leads to a lower splitting effect when
screwing in the screw.
Product details:
- Diameter: 8.0mm
- Length: 80mm
- Thread length: 50mm
- Head type: Countersunk
- Head diameter: 14.5mm
- Drive type: TX40
- Material: Hardened Stainless Steel
- Box qty: 50
Advantages:
- Faster and simpler screwing-in
- Lower splitting effect
- National and international approvals
- Higher corrosion resistance than conventional galvanising
- Applicable in service classes 1 and 2
- Contains no chromium(VI) oxide
- Resistant to mechanical loading
- Inhibits contact corrosion with fixtures
- No knocking of the screws when screwing in with a TX drive
Certification:
• European Technical Approval ETA-11/0024
• Self-drilling screws as wood fastener
Customers also bought
