CODE: 944593
Paneltwistec Zinc Structural Screws Flanged – 8 x 180mm
(50 per pack)
Paneltwistec wood screws are used as fasteners for load-bearing timber structures between components made of solid timber, glued laminated timber, cross laminated timber and veneer laminated timber, as well as... Read more
£22.17
(50 per pack) BULK QUANTITY DISCOUNTS
4+
£19.96
10+
£18.96
Free delivery on orders over £60
Trade prices and bulk discounts
Paneltwistec wood screws are used as fasteners for load-bearing timber structures between components made of solid timber, glued laminated timber, cross laminated timber and veneer laminated timber, as well as similar wood-based materials, board-shaped wood-based materials or steel-timber connections. Paneltwistec wood screws can generally be screwed in without any need for pre-drilling. The exception to this rule is when they are used indeciduous wood / hardwood.
Product details:
- Diameter: 8.0mm
- Length: 180mm
- Thread length: 90mm
- Head type: Flanged
- Head diameter: 14.5mm
- Drive type: TX40
- Material: Hardened carbon steel, blue / yellow electrogalvanized.
- Box qty: 50
Advantages:
- Faster and simpler screwing-in
- Lower splitting effect
- National and international approvals
- Higher corrosion resistance than conventional galvanising
- Applicable in service classes 1 and 2
- Contains no chromium(VI) oxide
- Resistant to mechanical loading
- Inhibits contact corrosion with fixtures
- No knocking of the screws when screwing in with a TX drive
Certification:
European Technical Assessment ETA-11/0024:
Self-drilling screws as wood fasteners for diameters of 3.5 to 12.0 mm
For fastening above-rafter insulation from diameters of 6.0 mm (usually diameters of 8.0 mm)
Paneltwistec wood screws are used as fasteners for load-bearing timber structures between components made of solid timber, glued laminated timber, cross laminated timber and veneer laminated timber, as well as similar wood-based materials, board-shaped wood-based materials or steel-timber connections. Paneltwistec wood screws can generally be screwed in without any need for pre-drilling. The exception to this rule is when they are used indeciduous wood / hardwood.
Product details:
- Diameter: 8.0mm
- Length: 180mm
- Thread length: 90mm
- Head type: Flanged
- Head diameter: 14.5mm
- Drive type: TX40
- Material: Hardened carbon steel, blue / yellow electrogalvanized.
- Box qty: 50
Advantages:
- Faster and simpler screwing-in
- Lower splitting effect
- National and international approvals
- Higher corrosion resistance than conventional galvanising
- Applicable in service classes 1 and 2
- Contains no chromium(VI) oxide
- Resistant to mechanical loading
- Inhibits contact corrosion with fixtures
- No knocking of the screws when screwing in with a TX drive
Certification:
European Technical Assessment ETA-11/0024:
Self-drilling screws as wood fasteners for diameters of 3.5 to 12.0 mm
For fastening above-rafter insulation from diameters of 6.0 mm (usually diameters of 8.0 mm)