Spax Csk Torx Screws Stainless Steel A2 – 4.5 x 30mm
(200 per pack)
BULK QUANTITY DISCOUNTS
There are only 6 of this item in stock.
If this is for a larger order, please contact us on 0161 794 1783 as we may be able to order this item for you.
- Diameter: 4.5mm
- Length: 30mm
- Finish: A2 306 grade Stainless Steel
- Drive Type: Torx T20 Drive bit
- Pack Qty: 200
SPAX 4CUT point
The SPAX 4CUT point makes it possible to insert screws without pre-drilling (wood-dependent). This is achieved by means of the special screw point. The square end pushes aside the fibres of the wood. This effectively reduces splitting in the material and hence reduces the screwing-in torque required. For hard wood types, we recommend pre-drilling even for SPAX with 4CUT point.
SPAX ground serrations
The advantage of a thread with SPAX ground serrations as opposed to a conventional thread is that it can cut through the fibres of the material more easily. This functions similarly to a serrated knife, which offers the same advantages e.g. when cutting a tomato. The SPAX ground serrations on the thread of the SPAX, in combination with the SPAX 4CUT point allow use without pre-drilling (wood-dependent)!
SPAX MULTI head
The SPAX MULTI Head has recessed pocket segments. Edges are thus formed between the individual segments, which reveal their cutting effect when they come into contact with wood. The head is thus countersunk cleanly and flush. If a SPAX with SPAX MULTI Head is used for attaching a metal fitting, the non-recessed surfaces of the screw stop when they come into contact with the metal fitting. This effectively prevents over-screwing the screw, and creates a solid connection between the metal fitting and the component. The surfaces are not damaged.