Also referred to as a double cross or Pozidriv, the Z-shaped cross recess represents an advancement of the cross drive introduced by the Phillips Screw Company. Unlike the conventional cross drive, the four flanks of the screwdriver blade in the Z-shaped version do not taper towards the tip. This design enhances the lateral grip for the screwdriver bit and diminishes the occurrence of the so-called cam-out effect. The cam-out effect is typical in traditional cross drives, where the tapering causes the bit to be pushed upward and out by the torque exerted by the cordless screwdriver. What this translates to for you: No more concerns about screwdriver bits slipping out, making your work easier with significantly less effort. This efficiency saves a considerable amount of time.
- Diameter: 4.5mm
- Length: 30mm
- Head Type: Countersunk
- Drive Type: Pozi PZ2
- Finish: Zinc and Yellox Passivated
- Pack Qty: 200
SPAX ground serrations
The distinctive feature of a thread equipped with SPAX ground serrations, in contrast to a conventional thread, lies in its enhanced ability to effortlessly cut through material fibers. This is akin to the efficiency of a serrated knife, particularly noticeable when slicing through a tomato. The integration of SPAX ground serrations on the thread of SPAX, coupled with the SPAX 4CUT point, enables usage without the necessity of pre-drilling (wood-dependent)!
Spax Multi Head
The prevalent head geometry in the SPAX universe is the countersunk head, also known as the flat countersunk head. This type of head boasts a conical shape, and in the case of SPAX, it is distinguished by the 90° MULTI head. Our countersunk head screws strike an optimal balance between maximum resistance to tightening torques and achieving a discreet, appealing screw connection. Featuring a polygonal underside with “pockets,” the flat countersunk head has the ability to create its own path into the wood, allowing for a clean and flush countersinking without the necessity of pre-drilling the screw hole. What this translates to for you: Effortless flush screw insertion—no need for pre-drilling or countersinking the screw hole.
Diameter | 4.5mm |
Length | 30mm |
Drive Type | Pozi |
Head Type | Countersunk |
Pack Type | Box |
- Diameter: 4.5mm
- Length: 30mm
- Head Type: Countersunk
- Drive Type: Pozi PZ2
- Finish: Zinc and Yellox Passivated
- Pack Qty: 200
SPAX ground serrations
The distinctive feature of a thread equipped with SPAX ground serrations, in contrast to a conventional thread, lies in its enhanced ability to effortlessly cut through material fibers. This is akin to the efficiency of a serrated knife, particularly noticeable when slicing through a tomato. The integration of SPAX ground serrations on the thread of SPAX, coupled with the SPAX 4CUT point, enables usage without the necessity of pre-drilling (wood-dependent)!
Spax Multi Head
The prevalent head geometry in the SPAX universe is the countersunk head, also known as the flat countersunk head. This type of head boasts a conical shape, and in the case of SPAX, it is distinguished by the 90° MULTI head. Our countersunk head screws strike an optimal balance between maximum resistance to tightening torques and achieving a discreet, appealing screw connection. Featuring a polygonal underside with “pockets,” the flat countersunk head has the ability to create its own path into the wood, allowing for a clean and flush countersinking without the necessity of pre-drilling the screw hole. What this translates to for you: Effortless flush screw insertion—no need for pre-drilling or countersinking the screw hole.
Diameter | 4.5mm |
Length | 30mm |
Drive Type | Pozi |
Head Type | Countersunk |
Pack Type | Box |