CODE: SSW108
A2 Stainless Steel Penny/Repair Washers – M12 x 30mm
(Qty: 10)
Each
£1.92
10+
£1.72
CODE: SCP028
Spax Flat Csk Screws Yellox Coated – Pozi – 5.0 x 90mm
(100 per pack)
Diameter: 5.0mm Length: 90mm Head Type: Countersunk Drive Type: Pozi PZ2 Finish: Zinc and Yellow Passivated Pack Qty: 100 The SPAX 4CUT point makes it possible to insert screws without... Read more
£15.19
(100 per pack)
Free delivery on orders over £60
Trade prices and bulk discounts
- Diameter: 5.0mm
- Length: 90mm
- Head Type: Countersunk
- Drive Type: Pozi PZ2
- Finish: Zinc and Yellow Passivated
- Pack Qty: 100
The SPAX 4CUT point makes it possible to insert screws without pre-drilling (wood-dependent). This is achieved by means of the special screw point. The square end pushes aside the fibres of the wood. This effectively reduces splitting in the material and hence reduces the screwing-in torque required.
SPAX ground serrations
The advantage of a thread with SPAX ground serrations as opposed to a conventional thread is that it can cut through the fibres of the material more easily. This functions similarly to a serrated knife, which offers the same advantages e.g. when cutting a tomato. The SPAX ground serrations on the thread of the SPAX, in combination with the SPAX 4CUT point allow use without pre-drilling (wood-dependent)!
SPAX MULTI head
The SPAX MULTI Head has recessed pocket segments. Edges are thus formed between the individual segments, which reveal their cutting effect when they come into contact with wood. The head is thus countersunk cleanly and flush. If a SPAX with SPAX MULTI Head is used for attaching a metal fitting, the non-recessed surfaces of the screw stop when they come into contact with the metal fitting. This effectively prevents over-screwing the screw, and creates a solid connection between the metal fitting and the component. The surfaces are not damaged.
| Diameter | 5.0mm |
| Length | 90mm |
| Drive Type | Pozi |
| Head Type | Countersunk |
| Pack Type | Box |
- Diameter: 5.0mm
- Length: 90mm
- Head Type: Countersunk
- Drive Type: Pozi PZ2
- Finish: Zinc and Yellow Passivated
- Pack Qty: 100
The SPAX 4CUT point makes it possible to insert screws without pre-drilling (wood-dependent). This is achieved by means of the special screw point. The square end pushes aside the fibres of the wood. This effectively reduces splitting in the material and hence reduces the screwing-in torque required.
SPAX ground serrations
The advantage of a thread with SPAX ground serrations as opposed to a conventional thread is that it can cut through the fibres of the material more easily. This functions similarly to a serrated knife, which offers the same advantages e.g. when cutting a tomato. The SPAX ground serrations on the thread of the SPAX, in combination with the SPAX 4CUT point allow use without pre-drilling (wood-dependent)!
SPAX MULTI head
The SPAX MULTI Head has recessed pocket segments. Edges are thus formed between the individual segments, which reveal their cutting effect when they come into contact with wood. The head is thus countersunk cleanly and flush. If a SPAX with SPAX MULTI Head is used for attaching a metal fitting, the non-recessed surfaces of the screw stop when they come into contact with the metal fitting. This effectively prevents over-screwing the screw, and creates a solid connection between the metal fitting and the component. The surfaces are not damaged.
| Diameter | 5.0mm |
| Length | 90mm |
| Drive Type | Pozi |
| Head Type | Countersunk |
| Pack Type | Box |
Customers also bought
CODE: 12180CBG
Timco HD Galvanised Coach Bolt & Nut – M12 x 180mm
(Qty: 10)
Each
£7.66
2+
£7.28
5+
£6.91
10+
£6.57
CODE: SCP022
Spax Flat Csk Screws Yellox Coated – Pozi – 5.0 x 60mm
(Qty: 100)
Each
£7.79
5+
£7.02
25+
£6.66